Porous shape memory polymers: Design and applications

Porous shape memory polymers (SMPs) exhibit geometric and volumetric shape change when actuated by an external stimulus and can be fabricated as foams, scaffolds, meshes, and other polymeric substrates that possess porous three-dimensional macrostructures. These materials have applications in multiple industries such as textiles, biomedical devices, tissue engineering, and aerospace. This review article examines recent developments in porous SMPs, with a focus on fabrication methods, methods of characterization, modes of actuation, and applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1300–1318     

Cold,warm, and hot programming of shape memory polymers

In this article, programming is classified as hot, warm, and cold, based on the temperature zone within which the programming is conducted. The strain and stress locking and releasing mechanisms are discussed within the thermodynamics framework. A new formula is developed for quantifying the strain recovery ratio of cold-programmed SMPs. Stress fixity ratio and stress recovery ratio are also defined based on the understanding of stress locking and recovery mechanisms. State-of-the-art literature on warm and cold programming is reviewed. Well-controlled programming as well as free strain recovery test and constrained stress recovery test are conducted, in order to validate the memory mechanisms discussed in this study. It is found that, while programming temperature has an insignificant effect on the final free shape recovery, it has a significant effect on the stress recovery. The recovery stress programmed by cold programming may be lower, equal to, or higher than that by hot programming, due to the different stress locking mechanisms and other factors such as damage during the thermomechanical cycle. Cold, Warm, and Hot Programming of Shape Memory Polymers © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1319–1339     

Molecular dynamics simulation of DNA‐directed assembly of nanoparticle superlattices using patterned templates

DNA‐directed assembly is a well developed approach in constructing desired nano‐architectures. On the other hand, E‐beam lithography is widely utilized for high resolution nano‐scale patterning. Recently, a new technique combining these two methods was developed to epitaxially grow DNA‐mediated nanoparticle superlattices on patterned substrates. However, defects are observed in epitaxial layers which restricts this technique from building large‐scale superlattices for real applications. Here we use molecular dynamics simulations to study and predict defect formation on adsorbed superlattice monolayers. We demonstrate that this epitaxial growth is energetically driven by maximizing DNA hybridization between the epitaxial layer and the substrate and that the shape anisotropy of the DNA‐mediated template posts leads to structural defects. We also develop design rules to dramatically reduce defects on epitaxial layers. Ultimately, with the assist of the computational study, this technique will open the door to constructing well‐ordered, three‐dimensional novel nanomaterials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1687–1692     

Highly Selective Zeolite Topologies for Flue Gas Separation

The separation of carbon dioxide from flue gas is essential for the reduction of greenhouse gas emissions. In adsorptive methods, the challenge lies in the choice of suitable porous materials. Among all zeolite topologies, a number of adsorbents with pore dimensions in the range of the guest molecules were identified to allow an excellent separation by diffusion, and MRE and AFO zeolite topologies appear to be the best candidates based on equilibrium adsorption. Also, it was found that the behavior of this gas mixture in DFT and APD zeolites differed from the normal behavior.     

UHMWPE纤维的超临界CO_2辅助渗透预处理研究

利用Minitab软件设计实验,以超高分子量聚乙烯纤维(UHMWPE)为原料,研究了在不同的超临界CO_2流体状态下,处理压力、温度和时间等因素对三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)渗入率的影响,确定了最佳因素设置范围;通过单因子实验优化了超临界CO_2处理工艺,并对经过电子束辐照的UHMWPE纤维凝胶含量和蠕变率进行了测试。研究结果表明:处理温度对TMPTMA的渗入率影响最大,其次为压力,时间的影响最小,确定了最优工艺条件为处理压力25MPa,温度80℃,时间30min;TMPTMA渗入率越高,电子束辐照后UHMWPE纤维的增感辐照交联效应和抗蠕变效果越好。     

New Penta(tetrathiafulvalenyl)[60]fullerenes for Supramolecular Materials

New penta(organo)fullerenes donor–acceptor systems bearing five tetrathiafulvalene recognition units have been synthesized to promote self‐assemblies similar in appearance to shuttlecocks nested into each other thanks to the conical host cavity created around the fullerene together with the π–π and electronic interactions.     

From Binuclear Complexes to Molecular Necklaces: Incorporating Flexible Ligands into Rotaxanes

The conversion of binuclear complexes into larger molecular necklaces can be achieved through rigidifying flexible ligands by threading them through a crown ether to form either an interpenetrated [2]pseudorotaxane or a permanently interlocked [2]rotaxane. The resulting complexes and assemblies are characterized by ¹H and DOSY NMR in solution and single‐crystal X‐ray diffraction in the solid‐state.     

Highly Phosphorescent Crystals of Square‐Planar Platinum Complexes with Chiral Organometallic Linkers: Homochiral versus Heterochiral Arrangements,Induced Circular Dichroism,and TD‐DFT Calculations

A novel class of chiral luminescent square‐planar platinum complexes with a π‐bonded chiral thioquinonoid ligand is described. Remarkably the presence of this chiral organometallic ligand controls the aggregation of this square planar luminophor and imposes a homo‐ or hetero‐chiral arrangement at the supramolecular level, displaying non‐covalent Pt–Pt and π–π interactions. Interestingly these complexes are highly luminescent in the crystalline state and their photophysical properties can be traced to their aggregation in the solid state. A TD‐DFT calculation is obtained to rationalize this unique behavior.     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913